ZKAJ-303 瓷砖晶硬剂 Tiles crystal hardening agent 特　　点 Features 本产品采用独特的工艺配方而成，专业用于各类陶瓷抛光砖、玻化砖表面的抛光、保养，可迅速在瓷砖表面生成一层坚硬致密、晶莹的光亮保护层，填补了瓷砖表面气孔和微孔，并具有高光泽、高硬度、防污、防滑、绿色环保的优异性能。 This product is made through a unique process prescription, professionally applied to polished tiles used in all types of ceramics, glassified tiles surface polishing, maintenance, a hard and compact surface, glistening bright protective layer can be quickly generated on the surface of tiles, this method compensates the tile surface porosity and microporous, and the product is characterized with high gloss, high hardness, anti-pollution, anti-skid and green excellent performances. 使用方法 How to use 1、 对陶瓷抛光砖表面清洁、去除表面蜡质、污质；表面有划横、磨损的时，需用翻新机及专用翻新碟打磨至表面光滑； 2、 等陶瓷抛光砖表面干燥后，使用本品配合瓷砖专用晶硬剂调成糊状涂于瓷砖地面上； 3、 使用175转晶面机及3M百洁垫进行抛磨，（每次操作范围在1平米左右，大约1~2分钟即可在瓷砖表面上达到晶莹的镜面效果。 4、 当瓷砖表面第一次经过本品配合晶硬粉抛光处理后，以后可定期使用本剂进行保养，可保持瓷砖长期晶莹的镜面效果。 1. Clean the surface of polished ceramic tiles, remove wax, dirty points on the surface; if the surface is worn or scraped, it is necessary to polish it by machines until the surface becomes smooth; 2. When the surface becomes dry, we should spread this product on the tile surface together with the tile specific crystal hardening agent which has been blended into paste state; 3. The tile surface should be polished by 175 rotating crystal surface machine and 3M cleaning clothes (polish 1 square meter area each time ) , after about 1 to 2 minutes the tile surface will reach glistening mirror effect; 4. When the tile surface has been polished by this product for the first time together with crystal hardening agent, this product can be regularly used for maintenance to maintain the long-term glistening mirror effect of tile surface. 注意事项 Note 请存放于儿童不易触及之处，如有误食，请大量饮水并就医。 若不慎入眼，请立即用清水冲洗。 Please store this product in the place beyond children’s touch, if it is mis-eaten, please drink a bulk of water and see the doctor. If eyes are inadvertently bespattered by the product, please wash with clean water.