本品既适用于云石，也适用于花岗石，具有结晶和清洁双重功能，它特别适用于新铺砌和表面不干净的石材， 与云石晶面加硬剂结合使用，能达到更佳的结晶效果。 使用方法： 1. 使用时要确保石材表面完全干净及干爽。 2. 先清洗石材表面的污渍及蜡渍，清洁后待石材表面干爽后才可做晶硬皇。 3. 晶硬皇是属于酸性产品，利用机械重量磨擦热力渗进石材内形成晶硬面处理，而不会形成外层面，使用时要 空气流通。 4. 将晶硬皇装入喷壶，把干爽的石材表面约每100×100cm用喷壶喷上3-4次，约10-15毫升然后用石材面 处理机、刷地机进行来回磨光，直至晶硬皇完全磨干后为最佳。次数越多累积厚度、光泽度越明显效果。 5. 因本产品为高度浓缩及支持环保，所以使用时不要过量药水，以免在表面弄成反效果 This product is applicable both to marble, but also to granite, with crystalline and clean two functions, it is parti cularly applicable to the new paving and surface not clean the stone,With , in combination, can achieve a bette r crystallization results. Usage: 1, clear the stone surface wax layer and dirt. 2 pairs of stone has been worn, uneven surfaces, or horizontal, when the depth of planning in advance need to be refurbished stone surfaces polished to flat and smooth. 3, the crystalline powder plus transfer of water into a paste Apply evenly after the stone surface and spray with water to make an appropriate stone to keep moist, ads with the Bai Jie, each work area about 3 to 5 square . 4, to be formed on the surface of stones treated with the bright crystal face, the wiper will paste objects blown by the next operation regionthe polishing method of repetition to the ground When a large number of bubbles with the water suction machine to exhaustion, and then re-add a new crystalline powder according to the above . 5, the local surface throughout the crystallization operation is complete, wash with water and dry.